DOW Filmtec TW30-2540 RO Membrane 1000 GPD

DOW Filmtec TW30-2540 RO Membrane 1000 GPD, a 2.5" × 40" Reverse Osmosis Membrane that can provide RO quality water up to 1,000 gallons per day at a 15% recovery rate. It can operate at feed pressures ranging from 225 psi to 600 psi with 99.5% salt rejection. This element offers the highest quality water for small commercial systems purifying less than one gallon per minute(0.2 m3/d) of RO water and is the industry standard for reliable operation and production of the highest quality water in commercial applications.

Filmtec RO elements separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability offering high rejection of dissolved solids and organics and operate very efficiently at lower pressures. The TW30 series Tap Water Thin Film-Commercial RO membranes are tape-wrapped—-built with the same high quality membranes and materials of construction as industrial elements, except for the hard outer shell, and are more economical for commercial systems with one or two elements per housing. In addition to the highest quality water and the lowest energy costs, DOW membranes also deliver savings through its increased resistance to fouling by providing the industry’s longest lasting and most reliable performance.

This membrane is a part of the "Tape-Wrapped 2540 Elements for Commercial Applications" by DOW FILMTEC and are applied in commercial water treatment systems, food service, hospitality industry, medical and research institutions. Its advanced technological design is manufactured for excellent structural stability and more productivity than other elements.

* Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77°F(25°C), 15% recovery. Permeate flow rates for individual elements may vary +/-20%.
**Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
*** Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.