4th of July Sale, 10% off any counter top and under sink residential systems
The Water Superstore
View Cart View Cart
0 item(s)

DOW Filmtec TW30-2521 RO Membrane 325 GPD

DOW Filmtec TW30-2521 RO Membrane 325 GPD, DWC03

Show Picture 1Show Picture 2

Click here to view larger image

Brand: DOW Filmtec
SKU: DWC03
List Price: $324.00
Price: $235.00

Dimensions: 2.5" x 21"
Weight: 3 lb

Quantity discounts:
QuantityUnit Price
1-5$235.00
6-11$226.00
12+$220.00

Ships in 3-5 days


emailEmail
Made in USA


DOW Filmtec TW30-2521 RO Membrane 325 GPD, a 2.5" x 21" Reverse Osmosis Membrane that can provide RO quality water up to 325 gallons per day at a 8% recovery rate. It can operate at feed pressures ranging from 225 psi to 600 psi with 99.5% salt rejection. This element offers the highest quality water for small commercial systems purifying less than one gallon per minute(0.2 m3/d) of RO water.

Filmtec RO elements separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability offering high rejection of dissolved solids and organics and operate very efficiently at lower pressures. The TW30 series Tap Water Thin Film-Commercial RO membranes are tape-wrapped making them suitable and recommended for systems with one or two elements per housing. In addition to the highest quality water and the lowest energy costs, DOW membranes also deliver savings through its increased resistance to fouling by providing the industry’s longest lasting and most reliable performance.

This membrane is a part of the "Small Commercial Elements" line of products by DOW FILMTEC and are applied in commercial water treatment systems, food service, hospitality industry, medical and research institutions. Its advanced technological design is manufactured for excellent structural stability and more productivity than other elements.


TW30-2521 Key Features and Benefits:

DOW Filmtec genuine membranes
  • 325 Gallons per day.
  • 600 psi maximum operating pressure.
  • Removes chemical contaminants.
  • Reduce wastewater volumes by increasing water reuse.
  • High flux results in high yields.
  • Low energy costs with high rejection providing good water quality.
  • Durable with Good Cleanability for Long Element Life.
  • DOW FilmTec high quality, long lasting and reliable performance.

Specifications

Model/SKU:DWC03
Manufacturer ID(Part#):TW30-2521 (Part #80641)
Dimensions(Diameter x Length):2.5" x 21" (actual 2.4 x 21)
Stabilized Salt Rejection:99.5%
Permeate Flow Rate(Gallons per Day, gpd):325 gpd (1230 L/Day or 1.23 m3/day)*
Maximum Feed Flow Rate(Gallons per Minute, gpm):6.0 gpm (1.4 m3/hr)
Applied Pressure(psi):225 psi (15.5 bar)
Maximum Operating Pressure(psi):600 psi (41 bar)
Maximum Pressure Drop(psi):13 psi (0.9 bar)
Maximum Operating Temperature(°F):113°F (45°C)
pH Range, Continuous Operation:2 - 11 **
pH Range, Short-Term Cleaning:1 - 13
Maximum Feed Silt Density Index(SDI):SDI 5
Free Chlorine Tolerance(ppm):< 0.1 ppm ***
Membrane Style:Drop-in Element
Membrane Material:Polyamide Thin-Film Composite
Active Area:13 sq. ft.
Outer Wrap:Tape-wrapped fiberglass outer shell
Housing/Pressure Vessel Size(inch):2.5 inch
* Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77°F(25°C), 8% recovery. Permeate flow rates for individual elements may vary +/-20%.
**Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
*** Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.


PRODUCT NOTES:
- Proper start-up of reverse osmosis water treatment system is essential to prepare the industrial membrane elements for operating service and to prevent membrane damage due to overfeeding or hydraulic shock.
- Before initiating system start-up procedures, membrane pre-treatment, loading of the membrane elements, instrument calibration and other system checks should be completed.
- During prolonged system shut downs, it is recommended that the Dow Filmtec membrane elements be immersed in a preservative solution. This is to prevent biological growth.
- (To ensure proper product startup and usage, please review Operation Guidelines and General Information section from the Product Data Sheet.)



Product Ratings and Reviews
Product Rating: 00000(0.00)   # of Ratings: 0   (Only registered customers can rate) Login to Rate

There are no Comments or Reviews for this product.