Large Nitrate Whole House Water Filter Steel
Stainless Steel Whole House Nitrate Removal system with a stainless steel tank and automatic back washing. The system uses specially designed nitrate-selective ion exchange resin to remove nitrates from drinking water.
Nitrate ( NO3 ) comes into water supply through a nitrogen cycle. It is one of the major ions found in water. Most nitrates in drinking water are a result of runoff from fertilizer use, leaching from septic tanks and natural deposits. US EPA MCL level for nitrate is 10 mg/L (ppm).
Purification System:
Water travels through 3 stages of filtration:
Stainless Steel Whole House Nitrate Removal system with a stainless steel tank and automatic back washing. The system uses specially designed nitrate-selective ion exchange resin to remove nitrates from drinking water.
Nitrate ( NO3 ) comes into water supply through a nitrogen cycle. It is one of the major ions found in water. Most nitrates in drinking water are a result of runoff from fertilizer use, leaching from septic tanks and natural deposits. US EPA MCL level for nitrate is 10 mg/L (ppm).
Purification System:
Water travels through 3 stages of filtration:

Nitrate Water Filter Regeneration and Preconditioning
Sodium chloride is generally preferred for regeneration for reasons of cost and efficiency. When available sea water can be used quite effectively. The use of softened water for make up of regenerant and rinse is often recommended to avoid the precipitation of calcium carbonate in and around the nitrate selective resin (or any other resin used in this application). Although the precipitation is not particularly detrimental in the short term, the long term effects may include increased resin attrition and leakage of nitrates.
System Specifications
Solid 316-Stainless Steel Tanks: heavy-duty, burst-proof construction filled with Nitrate reducing media.
Brine exchange mineral tank.
Riser style 1" internal flow distributor.
Solid state microprocessor with LED display Electronics control valve
Maximum Flow Rate: 11.0 gallons per minute.
3/4" or 1" Stainless Steel Bypass Valve.
Filter and Media Replacement Intervals:
Resin Media Life: 1.5 cu.ft - 5-7 years, 2 cu.ft - 7-8 years
Filter Life, sediment pre-filter and carbon post-filter: 6-9 months
Warranty
1 year System Manufacturer Warranty, 5 years Controller, 10 year Warranty on resin tank and brine tank assembly.
Documents
![]() |
2.15 MB |
![]() |
2.51 MB |
![]() |
64 KB |
![]() |
0.22 MB |
![]() |
2.73 MB |
Product is not rated.