Commercial Arsenic Removal Water Filters for 22-280 gpm flow. System utilizes a strongly basic hybrid anion exchange resin specially formulated to selectively remove arsenic. Our Arsenic Water Filters exhibit large throughput capacity in arsenic removal on potable or drinking water supplies. Performance is virtually unaffected by common anions, such as chlorides, bicarbonates or sulfates. The system is effective over the entire pH range of potable water.
Commercial Arsenic Removal Systems are designed to effectively remove arsenic from drinking water.
In 1975, EPA (Environmental Protection Agency) set arsenic water standard as 50 ppb (particles per billion), based on Public Health Service standard set in 1942. In the late 1990th, medical community began to question safety of this standard. The World Health Organization had a different standard, which was set at 10 ppb at the time. In October 2001, under pressure from the Bush administration, the arsenic maximum contamination level (MCL) was set at 10 ppb, although scientific community demanded a stricter standard of 3 ppb. This new standard affected a lot of communities with municipally treated and well water where arsenic is present at higher levels.
Arsenic is an element that naturally occurs in the earth's crust. With rock erosion, arsenic gets into drinking water bodies. Arsenic can also combine with other elements to form inorganics and organic arsenicals. In general, inorganics are considered to be more toxic. Arsenic is poisonous in doses significantly larger than 65 mg (1 grain), and the effect could arise from single large dose or multiple smaller doses.
Commercial Arsenic Removal Water Filters features:
Can be used with standard Fleck® electronic controls or with a mechanical control
Heavy duty structural tanks - Poly Glass mineral tank
All brass, motor driven control valve with fully adjustable regeneration cycles (on units with electronic control valve)
Self adjusting backwash control (on units with electronic control valve)
Flow controller to limit backwas flow
Engineered for commercial and industrial use
Optional skid mounting for tanks
Available water flow is between 22 GPM and 280 GPM (gallons per minute).
5 year Warranty on all Fleck control valves.
10 year Warranty on media tank.
All units can be assembled with or without automatic backwash valve. Contact us for price information on manually backwashed units.
These units are heavy! Actual shipping charges will be added to your order after unit is assembled. A very rough estimate (we express no guarantees if this price is accurate on the date of order!) of shipping charges would be between $180 and $500 (continental US), and can vary greatly based on model, your zip code, location, availability of lift gate, fork lift, and gas prices. LTL Freight shipping out of Atlanta, Georgia.
Backwashing time is 10 minutes.
Table below will help you to identify system for your application. Look for water line size (Pipe Size) and Peak Flow in gallons per minute (GPM), and choose an appropriate model.
|Capacity (Gallons) at 50 ppb in influent with 10 ppb in effluent
|Peak Flow, GPM
|Mineral Tank Size, in.
|Service Flow, GPM
|Backwash Flow, GPM
|Space Required, in. (WxDxH)
|Shipping Weight, lbs
Arsenic Removal Water Filter control valves: