Free shipping in USA on Residential orders over $99
The Water Superstore:800-439-0263
View Cart View Cart
0 item(s)

DOW Filmtec TW30-2026 RO Membrane 220 GPD

DOW Filmtec TW30-2026 RO Membrane 220 GPD, DWC01

Show Picture 1Show Picture 2

Click here to view larger image

Brand: DOW Filmtec
SKU: DWC01
Price: $169.00

free shipping

Dimensions: 2" x 26"
Weight: 3 lb

Quantity discounts:
QuantityUnit Price
1-5$169.00
6-11$160.00
12+$154.00

In stock


emailEmail
Made in USA


DOW Filmtec TW30-2026 RO Membrane 220 GPD, a 1.8" x 26" Reverse Osmosis Membrane that can provide RO quality water up to 200 gallons per day at a 5% recovery rate. It can operate at feed pressures ranging from 225 psi to 600 psi with 99.5% salt rejection. This element offers the highest quality water for small commercial systems purifying less than one gallon per minute(0.2 m3/d) of RO water.

Filmtec RO elements separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability offering high rejection of dissolved solids and organics and operate very efficiently at lower pressures. The TW30 series Tap Water Thin Film-Commercial RO membranes are tape-wrapped making them suitable and recommended for systems with one or two elements per housing. In addition to the highest quality water and the lowest energy costs, DOW membranes also deliver savings through its increased resistance to fouling by providing the industry’s longest lasting and most reliable performance..

This membrane is a part of the Small Commercial Elements line of products by FILMTEC and are applied in commercial water treatment systems, food service, hospitality industry, medical and research institutions. Its advanced technological design is manufactured for excellent structural stability and more productivity than other elements.


Key Features and Benefits:

  • 220 Gallons per day.
  • 600 psi maximum operating pressure.
  • Removes chemical contaminants.
  • Reduce wastewater volumes by increasing water reuse.
  • High flux results in high yields.
  • Low energy costs with high rejection providing good water quality.
  • Culligan Compatible TFC(Thin Film Composite) Membrane.
  • Durable with Good Cleanability for Long Element Life.
  • DOW FilmTec high quality, long lasting and reliable performance.

Specifications

Model/SKU:DOW-FT-05
Manufacturer ID(Part#):TW30-2026(Part #80635)
Dimensions(Diameter x Length):1.8 x 26(actual 1.8 x 26)
Stabilized Salt Rejection:99.5%
Permeate Flow Rate(Gallons per Day, gpd):220 Gal/Day (833 L/Day or 0.83 m3/day) *
Maximum Feed Flow Rate(Gallons per Minute, gpm):5.0 gpm (1.1 m3/hr)
Applied Pressure(psi):225 psi (15.5 bar)
Maximum Operating Pressure(psi):600 psi (41 bar)
Maximum Pressure Drop(psi):13 psi (0.9 bar)
Maximum Operating Temperature(°F):113°F (45°C)
pH Range, Continuous Operation:2 - 11 **
pH Range, Short-Term Cleaning:1 - 13
Maximum Feed Silt Density Index(SDI):SDI 5
Free Chlorine Tolerance(ppm):< 0.1 ppm ***
Membrane Style:Drop-in Element
Membrane Material:Polyamide Thin-Film Composite
Active Area:7 sq. ft.
Outer Wrap:Tape-wrapped fiberglass outer shell
Housing/Pressure Vessel Size(inch):2.0 inches
* Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77°F(25°C), 10% recovery. Permeate flow rates for individual elements may vary +/-20%.
**Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
*** Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.


PRODUCT NOTES:
- The Filmtec TW30-2026 membrane has double o-rings on each end of the permeate tube.
- Proper start-up of reverse osmosis water treatment system is essential to prepare the TW302026 industrial membrane elements for operating service and to prevent membrane damage due to overfeeding or hydraulic shock.
- Before initiating system start-up procedures, membrane pre-treatment, loading of the membrane elements, instrument calibration and other system checks should be completed.
- During prolonged system shutdowns, it is recommended that the Dow Filmtec membrane elements be immersed in a preservative solution. This is to prevent biological growth.
- Also Compatible with Culligan Water Filters B-1L, B-1L Plus, B-2L, B-2L Plus, B-3L, B-3L Plus, B-4L, B-4L Plus. (See Related Documents Below.)
(To ensure proper product startup and usage, please review Operation Guidelines and General Information section from the Product Data Sheet.)



Related Products
Product Ratings and Reviews
Product Rating: 00000(0.00)   # of Ratings: 0   (Only registered customers can rate) Login to Rate

There are no Comments or Reviews for this product.