Aquatec Permeate Pump ERP1000-JG-S, with 10-100 gpd flow. This simple yet revolutionary device , powered only by hydraulic energy of brine water that is usually lost to the drain (no electricity required). The Permeate Pump forces product water into a storage tank, reducing membrane back pressure, maximising available feed pressure. The pump dramatically increases a performance of Reverse Osmosis units, reducing waste water by up to 80%.
Permeate pumps can also bring storage tank up to line pressure and then can shut the flow when the tank reaches capacity, eliminating the need for hydraulic shut-off valve.
Higher delivery pressure, faster water production , higher water quality and extended life of the membrane - these are other advantages of having Aquatec Permeate Pump on your RO system.
Aquatec Permeate Pump Features
Permeate Pump uses energy of discharged water of your Reverse Osmosis system to pump permeate into system's pressurized tank. It does not require electricity. When it is working , it isolates your tank from RO membrane and lets your membrane perform similarly to atmospheric tank system.
Maximum production: 100 gallons per day
Recovery improvements: up to 400%
Waste water reduction: up to 80%
Works with membranes between 10 and 100 gallons per day.
Effective with inlet water pressure as low as 30 psi.
Can fill up the tank 4 times faster.
NSF approved (Standard 58)