Water test kit

All-in-one WS 425B Drinking Water Test Kit. Comprehensive at-home water test that will show if your drinking water contains unsafe or undesireable amounts of one or more of the following 8 contaminants: Bacteria, Lead, Pesticides, Nitrates, Nitrites, Chlorine, pH, and water hardness. Test for 1 water source.

 

EPA maximum contaminant levels or guideline standards:

Bacteria	None
Lead	Below 15 ppb
Pesticides	Below 3ppb (atrazine), Below 4ppb (simazine)
Nitrite	Below 1.0 ppm
Total Nitrate/Nitrite	Below 10.0 ppm
Total Chlorine	Below 4 ppm, pH 6.5 to 8.5
Total Hardness	50 ppm or less

 

Before you begin...
1. Keep tests out of reach of children and pets. Do not ingest anything from this test kit. Do not drink water sample used for testing. Store and use at room temperature (60-86 F)
2. Do not open packets or a vial until you are ready to perform the tests.
3. Do not use on hot water or water containing bleach detergents.
4. Do not re-use any part of the test kit.
5. Read and follow all instructions carefully.

 

Read Water Test Kit Instructions

 

WaterSafe drinking water test kits are using up-and-coming technology of test strips for accurate at-home water testing. They are fast, affordable, and provide lab quality results within minutes (except bacteria test). With WaterSafe all-in-one city water test kit, you can learn many things about your tap water: find if you have hard water, detect high amounts of chlorine, check if lead levels are unusually high, see if your water is acidic, alkaline or balanced via pH test.

 

Have your own well? Try Well Water Test Kit, or for more detailed results 15-contaminant Water Quality Test Kit.