- Residential Systems
- Commercial Systems
- Bottleless Coolers
- Water Tests
- Filters & Media
Brand: Crystal Quest
Weight: 2.5 lb
Standard 20"x 2.5" Nitrate Removal Filter Cartridge. Contains special nitrate-selective resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.
Optimum performance is achieved at 0.5 GPM (gallon per minute). Be aware, that the higher the flow rate, the less nitrates will be removed from water. The cartridge capacity is 22700 ppm of nitrates as NO3. This cartridge can be regenerated using sodium chloride brine.
Nitrate Removal Filter Cartridge features:
How long will my filter last?
To calculate capacity, first calculate the ppm (mg/L) of nitrates as NO3, then divide 22700 by that number to get the gallons.
About Filtration MediaMedia in this cartridge is a strong base anion exchange resin supplied in the chloride form as moist, tough, uniform spherical beads. It is especially useful in nitrate removal applications due to its ability to remove nitrates in the presence of sulfates and other divalent ions.
It is also intendend for use in application involving monovalent and divalent ions where monovalent ions must be removed preferentially, such as removing perchlorates from ground water
Q: Can Water Nitrate Removal Cartridge be regenerated?
A: Yes it can. Use kitchen salt (or potassium chloride) and room temperature water.
1. Soak cartridge for 30 minutes in salt water
2. Rinse or soak cartridge for 30 minutes in salt-free water
3. Shake cartridge well. Rinse it.
4. Install cartridge into a housing and flush it - run water through it for 5-10 minutes.