FilterWater.com - Water Filters and Filtration Systems   call us about water filters  
View Cart View Cart
  0 item(s)
The Water Filtration store Free shipping on orders over $99 in USA
Search:  
 Home | Bestsellers | Reminder Service | My Account  Orders  

Testimonials
Water filters really work! You guys are the best!
read more
 
Home > Crystal Quest → Multistage Fluoride Cartridge

Multistage Fluoride Cartridge

7-stage Water Filter Cartridge With Fluoride Removal media, CQE-RC-04049

Click here to view larger image

Brand: Crystal Quest
SKU: CQE-RC-04049
List Price: $57.00
Our Price: $51.00

Quantity:  

Weight: 2.1 lb

In stock


emailEmail
Made in USA
A 7-stage, 10"x2.5" specialty water filter cartridge with fluoride removal stage. Cartridge consists of one-micron filter pad, fluoride removal media, KDF55, KDF85, GAC, and another one-micron pad. Removes hundreds of contaminants from your drinking water. (This product used to be called a 6-stage fluoride removal filter).
 
CQE-RC-04049 Multi-stage Water Filter Cartridge with Fluoride Removal fits most standard 10"x2.5" inch housings, including countertop or under sink.

Multi-Stage KDF+GAC Filter with Fluoride Removal features:

In stage 1 and 7, water flows through pre one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter
 
In stage 2, water flows through the fine mesh pre-resin media that reduces fluoride below 0.5 ppm.
In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (KDF-55D ®, and KDF-85D ®). KDF is a major advancement in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (REDOX) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
Tests on KDF/GAC cartridge have shown 99+% chlorine removal past 20,000 gallons of water. In comparison, carbon cartridges of comparable volumes drop below 90% effectiveness after only 4,000 gallons.
Iron and hydrogen sulfide are oxidized into insoluble matter and attach to the surface of the media. Heavy metals such as lead, mercury, copper, nickel, chromium, cadmium, aluminum, and other dissolved metals are removed from the water by the electrochemical process. They are attracted to the surface of the media, much like a magnet. The media inhibits bacterial growth throughout the entire unit. In fact, it has been shown to be reduced up to 90%, eliminating the need for silver, which is commonly used in carbon-only filters (silver is considered a pesticide by the EPA and, as such, must be registered with them).
Is copper or zinc added to the water in any significant amount? On 2.3 ppm chlorinated water, <0.05 mg/l copper and only 0.46 mg/l zinc were measured. The EPA aesthetic levels are 1.0 mg/l for copper and 5.0 mg/l for zinc. Both zinc and copper are essential minerals for good health - the FDA recommends a daily intake of 15 mg of zinc and 2 mg of copper.
In stage 4, water flows through ion exchange resin that reduces heavy metals such as lead and aluminum, and reduces water hardness.
In stage 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzine) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water, bad taste, and odors from your drinking water.
 
Carbon is extremely porous and provides a large surface area for contaminants to collect. Carbon-only filters must also use their capacity for chlorine removal, resulting in a shortened life. They also may use a bituminous coal carbon, which is good at removing chlorine, but not as effective at removing chemicals. We use a high-grade coconut shell carbon that is most effective at removing chemicals. Coconut shell carbon provides a significantly higher volume of micro-pores than either coal, wood or lignite based carbon. As a result, it is more effective than other carbon types in removing trihalomethanes (THM's) and other chemicals from municipally supplied water. Since our REDOX media removes the chlorine before it reaches the carbon, the carbon capacity is not wasted on chlorine and is free to concentrate more effectively on organic contaminants.
 

7-stage Water Filter with Fluoride Removal specifications:

Fluoride removal capacity (<100 ppm hardness):
2700 ppm (average 500-750 gallons)
As high as 6000 ppm F+ with effluent levels
below 0.2 ppm from 10 ppm feed.
Design flow rate (nominal):
0.25 GPM
pH Range:
4-10, optimum performance at 5 pH
Maximum temperature:
100°F (38°C)
Minimum temperature:
40°F (5°C)
Maximum pressure:
125 PSI (8.6 bar)
Minimum pressure:
20 PSI (1.4 bar)
Micron rating:
25 nominal
Cartridge life:
1 year
Filter dimensions:
10 by 2.5 inches
 
Multi-stage KDF+GAC cartridge with AAL Fluoride reduction capability.
Manufacturer product number: CQE-RC-04049







Product Rating: (4.00)   # of Ratings: 1   (Only registered customers can rate)


5 stars
4 stars
3 stars
2 stars
1 star
0% 50% 100%

Sort: New to Old RE-SORT COMMENTS:

Customer Reviews : 1 Review(s)
1. Amy on 8/4/2012, said:

I replaced my old 6 stage filter with the new 7 stage filter,(same serial number), and the tast is better. My water is on the acidic side (pH of 6.5 using pH strips)so I always add 1/4 tsb of baking soda to 1 gallon of water. It also helps with the taste. You should test your water's pH before adding any.
  (1 people found this comment helpful, 0 did not)
: 1 Review(s)



Home | Customer Service | Contact Us | About Us | Affiliates | School & Government | Site Map

Copyright ©2003-2014 FilterWater.com   Terms & Conditions | Policies | Privacy


Water Quality Association Member
VISA, MasterCard, Discover and Amex accepted PayPal Accepted
7-stage Water Filter Cartridge With Fluoride Removal media