Free shipping in USA on Residential orders over $99
The Water Superstore:800-439-0263
View Cart View Cart
0 item(s)

DOW Filmtec BW30-365 RO Membrane 9500 GPD

DOW Filmtec BW30-365 RO Membrane 9500 GPD, DWC63
Click here to view larger image

Brand: DOW Filmtec
SKU: DWC63
Price: $744.00
List Price: $744.00
On Sale For: $690.00
As Low As $21 Per Month details

free shipping

Dimensions: 8" x 40"
Weight: 26 lb

Quantity discounts:
QuantityUnit Price
1-5$690.00
6-11$675.00
12+$664.00

In stock


emailEmail
Made in USA


DOW Filmtec BW30-365 RO Membrane 9500 GPD, a 8" x 40" brackish water Reverse Osmosis Membrane that can provide RO quality water up to 9,500 gallons per day at a 15% recovery rate. It can operate at feed pressures ranging from 225 psi to 600 psi with 99.5% salt rejection. This element offers the highest quality water for large-scale industrial and municipal water treatment systems purifying greater than approximately 10 gpm (2300 L/h) of RO water and is the industry standard for reliable operation and production of the highest quality water in commercial applications. The element features the thickest feed spacer (34 mil) available in the industry today to lessen the impact of fouling as well as a fiberglassed shell. These elements are ideal for reverse osmosis plant managers and operators dealing with challenging water and seeking consistent, high performance and long element life.

The BW30-365 can separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability offering high rejection of dissolved solids and organics and operate very efficiently at lower pressures. This minimizes equipment CAPEX in designs with savings in elements and pumping while delivering the most effective cleaning performance, robustness and durability due to its widest cleaning pH range(1–13) tolerance. This element is primarily used in industrial water demineralization and production of municipal drinking water. For years, the DOW FILMTEC BW30-365 has been the element of choice for system designers, OEMs and system operators requiring consistently high performance and maximum element life when treating difficult feed waters.

BW30-365-IG DISCONTINUED

Key Features and Benefits:

  • 9,500 Gallons per day.
  • 34 mil feed spacer.
  • 600 psi maximum operating pressure.
  • Removes chemical contaminants.
  • Delivers high quality permeate water while minimizing unit cost.
  • High flux results in high yields.
  • Low energy costs with high rejection providing good water quality.
  • Hard shell exterior for extra strength.
  • Durable with Good Cleanability for Long Element Life.
  • DOW FilmTec high quality, long lasting and reliable performance.

Specifications

Model/SKU:DWC63
Manufacturer ID(Part#):BW30-365 (Part #80773 )
Dimensions(Diameter x Length):8" x 40" (actual 7.9 x 40)
Stabilized Salt Rejection:99.5%
Permeate Flow Rate(Gallons per Day, gpd):9,500 Gal/Day *
Maximum Feed Flow Rate(Gallons per Minute, gpm):85 gpm (19.3 m3/hr)
Applied Pressure(psi):225 psi (15.5 bar)
Maximum Operating Pressure(psi):600 psi (41 bar)
Maximum Pressure Drop(psi):15 psi (1.0 bar)
Maximum Operating Temperature(°F):113°F (45°C)
pH Range, Continuous Operation:2 - 11 **
pH Range, Short-Term Cleaning:1 - 13
Maximum Feed Silt Density Index(SDI):SDI 5
Free Chlorine Tolerance(ppm):< 0.1 ppm ***
Membrane Style:Drop-in Element
Membrane Material:Spiral-wound with Polyamide Thin-Film Composite
Active Area:365 sq. ft. ****
Outer Wrap:Hard fiberglass outer shell
Housing/Pressure Vessel Size(inch):8 inch
* Permeate flow rate and salt rejection based on the following test conditions: 2,000 ppm NaCl, 225 psi (8.6 bar), 77°F(25°C), pH 8, 15% recovery. Permeate flow rates for individual elements may vary +/-15%.
**Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
*** Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose
**** Active area guaranteed ±3%. Active area as stated by Dow Water & Process Solutions is not comparable to nominal
membrane area often stated by some manufacturers..



PRODUCT NOTES:
- Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
- Proper start-up of reverse osmosis water treatment system is essential to prepare the industrial membrane elements for operating service and to prevent membrane damage due to overfeeding or hydraulic shock.
- Before initiating system start-up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.
- During prolonged system shutdowns, it is recommended that the Dow Filmtec membrane elements be immersed in a preservative solution. This is to prevent biological growth.
(To ensure proper product startup and usage, please review Operation Guidelines and General Information section from the Product Data Sheet.)
Documents
DOW Filmtec BW30-365 Element (pdf) 0.22 MB



Related Products
Product Ratings and Reviews
Product Rating: 00000(0.00)   # of Ratings: 0   (Only registered customers can rate) Login to Rate

There are no Comments or Reviews for this product.