- Residential Systems
- Commercial Systems
- Bottleless Coolers
- Water Tests
- Filters & Media
Dimensions: 6 x 3.5 x 3.5
Weight: 0.5 lb
A do-it-yourself Pool and Spa Bacteria Water Test strips. Revolutionary way to test your pool and spa for harmful bacteria in just 15 minutes. Contains 10 tests.
Now there is a simple test that detects bacteria in swimming pools and spas in less than 20 minutes, with a simple procedure that requires no instrumentation or user training. This Bacteria Test has all the accuracy and reliability of a lab test, but in a disposable test strip.
WS359BP Rapid Bacteria Pool Test kit, 10 tests. Affordable test kits, just over $2 per test kit. On site results, no chemicals to add, no transporting of water samples! New, upgraded verison with improved detection, now only 15 minutes!
WS-359BP Pool and Spa Bacteria Test Kit How-To:
Each packet contains test strip, sample vial and dropper pippette
Do not open packet until immediately prior to use!
When a test is required, open the packet
Use sample vial provided to run the test - place exactly one dropper-full of water into a vial. Gently swirl vial. Sample pool water at the shallow end of the pool
Let stand for 7 minutes, swirl again and return to flat surface
Place test strip into sample vial with arrows pointing down
Wait 10 minutes. Do not disturb sample. Reddish lines will start appearing on the strip
How to read results:
NEGATIVE: one line next to the number 2
POSITIVE: line 1 and line 2 present. line 1 may be lighter than line 2.
Pool Bacteria Water Test Parameters
Detection Range: 10^3 cfu/ml
Water Temperature: 40 - 110°F
pH range: 4 - 10
Total Chlorine: 0 - 50 ppm
Bromine: 0 - 40 ppm
Each test packet contains: test strip, sample vial and sample dropper pipette
MSDS is NOT required, no wet chemistry!
Do not open the foil packet until immediately prior to use. Use vial provided. Sample pool water at the shallow end of the pool. Do NOT reuse vials, test strips or droppers.