Mixed Bed DI Industrial Grade cartridge 10"x2.5". 10 inch Demineralizing cartridge is great to use in situations where water has a high mineral content and needs to be demineralized. DI Filter Cartridge removes Total Dissolved Solids ( TDS ) via a high quality mixed bed de-mineralizer resin.
Demineralizing " deionizer " filter cartridge for residential and commercial applications. A 2.5"x10" Demineralizing cartridge removes minerals and reduces limescale build-up that can cause excessive equipment downtime and increase maintenance costs. Cartridge is especially useful for applications such as car washes, pharmaceutical water filtration and low capacity steamers and warmers that are not emptied daily, where white mineral deposits are common and need to be removed.
Flow Rate: 1-1.5 GPM
Demineralizing Capacity: 305 grains or 5,200 ppm
Maximum temperature: 100°F (38°C)
Minimum temperature: 40°F (5°C)
Maximum pressure:125 PSI (8.6 bar)
Minimum pressure: 20 PSI (1.4 bar)
Micron rating: 5 nominal
Filter dimensions: 10 by 2.5 inches nominal, will fit a standard 10"x2.5" water filter housing
Materials of Construction
• End Caps: Polypropylene
• Inner/Outer Wraps: Polyolefin
• Netting: Polyethylene
• Gaskets: Buna-N
To determine cartridge life, divide total capacity of cartridge (305 grains or 5,200 ppm) by the TDS in grains per gallon (gpg) or milligrams per liter (ppm), respectively.
Change cartridge every 6 months for preventive maintenance.