Whole House Sediment water Filters are designed for the removal of turbidity in the water caused by sand, silt, ferric iron and oxidized manganese or sulfur. Home Sediment Water Filter's fractured edges and irregular surface provides a high surface area and complex flow path for efficient removal of suspended matter through out the filter bed, typically reducing suspended solids down to the 20-40 micron range. Also available with 5 micron turbidity removal media.
Larger particle size creates less pressure loss through the filter and allows deeper sediment penetration into the bed for higher sediment loading and longer filter runs. This large and irregular shape prevents the screening and caking of sediment in the top several inches of the filter bed as happens in the typical sand filter, thus preventing a rapid build up of head loss and blinding problems.
Residential and Light Commercial Sediment Water Filter System's light weight means lower backwash rates and better bed expansion to release trapped sediment and rinse the filter media during the backwash cycle. This ideal combination of particle shape, size and density make it a good choice where quality water filtration and water conservation are important.
Sediment / Turbidity Water Filter specifications
Water travels through 3 stages of filtration:
First stage, water travels through a 20" sediment cartridge that removes sediment, silt, sand and dirt. Also this extends the life of water softeners, water filters, and prevents damage to control valves or pumps.
Second stage water travels through a 1.5 or 2.0 cubic foot Sediment media tank with an Automatic Microprocessor Control valve (The longer time that the water is in contact with the media, the more effective is the conditioning and filtering of the water.)
Third stage, water travels througha 20" solid carbon cartridge for a final conditioning of the water and removing any remaining contaminates and VOC's which may be in the water.
Whole House Sediment Filter Advantages
There is less pressure loss through a bed of CQ- S 100 than through most other filter medias
Light weight requires lower backwash rates than those required for other filter medias
High service rates result in lower equipment costs and a savings in space
High sediment reduction capacity results in longer filter runs, with a substantial savings in backwash water and time out of service
Replacement of sand with CQ- S 100 in existing installations may increases filter capacity 100% or more. (Caution should be taken upon start-up that the lightweight CQ- S 100 is not washed to drain.)
Home Sediment Filter Physical Properties:
- Color: Light grey to near white
- Bulk Density: 24-26 lbs./cu. ft.
- Specific Gravity: 2.25 gm/cc
- Mesh Size: 12 x 30
- Effective Size: 0.67 mm
- Uniform Coefficient: 1.8
- Hardness: 6 (Mohs scale)
CONDITIONS FOR OPERATION
- Water pH range: wide range
- Maximum water temperature: 140°F/60°C
- Bed depth: 24-36 in.
- Freeboard: 50% of bed depth (min.)
- Backwash bed expansion: 20-40% of bed depth
- Upon installation allow bed to soak overnight before backwashing
- Poly Glass™mineral tank
- Riser style 1" internal flow distributor.
- Flow rate: 11 GPM (gallons per minute)
- 3/4" or 1" Stainless Steel Bypass Valve.
Sediment and Carbon cartridge life: 6-8 months
Sediment / Turbidity media life: 1.5 cu.ft - 750,000 gallons, 2 cu.ft - 1,000,000 gallons (varies significantly based on sediment volume).
Sediment Filter System Features
- 10 year Warranty on resin tank and brine tank assembly
- 30 Day Money Back Guarantee
- 5 year Warranty on all Computer Monitored control valves
- By-pass valve
- Low voltage transformer
Manufacturer's Product numbers: CQE-WH-01259, CQE-WH-01260
Solid state microprocessor with LED displayElectronics control valve :
- Compact turbine meter
- Downflow or upflow regeneration cycles
- NOVRAM valve status and memory backup
- Double backwash capability
Self-backwashing Solid state Automatic microprocessor with LED display Electronics control valve system that automatically removes the trapped contaminants within the filter bed and washes them down the drain. 1/4" water line connector to drain (water line is not included)
3/4" or 1" Stainless Steel bypass valve